Myyjä: ItalWax

ItalWax FLEX nestemäinen ihokarvanpoistovaha purkki ALGAE, 400 ml

8032835175020

* Huomaa, että tuotteen väri voi poiketa hieman alkuperäisestä näytön asetusten vuoksi
€6,74 EUR
Verot sisällytetty. Toimitus lasketaan kassalla.
Loppuunmyyty
Takuu

Tämä tuote sisältää 1 vuoden rajoitetun takuun materiaali- ja valmistusvirheistä.

GPSR

Filo Bianco S.R.L. Adrese: Via Monte Bianco, 17, 20833 Paìna MB, Itālija, info@italwax.it

 
 
 
Description
Flex Waxes are an excellent combination of synthetic and natural resins with the addition of innovative components.
The waxes possess special plasticity, are applied to large surfaces in a very thin and even layer using a spatula (or roller).

Upon cooling, the waxes form a thin film that fixes all hairs (especially when working with the spatula technique) and ensures strong adhesion to the depilatory strip. 100% hair removal from the first time without breakage.

Do not leave stickiness on the skin.

Suitable for hair of any coarseness.

Contraindications. Acute and chronic skin diseases, varicose veins in the depilation area.
Rules for using warm wax: Cartridge method:
• Heat the wax in an electric heater to t +40 °C.
• Treat the skin in the depilation area with lotion or foam before depilation.
• Without removing the cartridge from the heater, roll the heated wax cartridge over a depilatory strip to ensure the wax is sufficiently heated.
• Apply the wax to the treated skin area in the direction of hair growth.
• Apply the depilatory strip, ensuring the end of the strip is in a wax-free area.
• Press the strip firmly against the skin.
• Grip the free end of the strip, and with a sharp movement, remove the strip in the direction against hair growth, parallel to the skin.
• Repeat the procedure on the next section. Do not apply wax to the same area more than twice.
• At the end of the procedure, be sure to remove any sticky residue and wax with a post-depilation lotion.
Rules for using warm wax: Spatula method:
• Heat the wax in an electric heater to t + 42°C.
• Treat the skin in the depilation area with lotion or foam before depilation.
• Apply a small amount of talc to the skin surface.
• Periodically stir the wax, monitoring its consistency; wax ready for use should not be liquid.
• Take the required amount of wax with a spatula.
• Remove excess wax from the spatula. Caution, wax can drip from the spatula!
• To avoid getting wax on yourself, keep the wax heater next to the couch. To carry the wax on the spatula to the depilation area without staining surfaces, hold a depilatory strip under the spatula.
• Apply the wax to the treated skin area in the direction of hair growth.
• Quickly spread the wax over the depilation area with the edge of the spatula, covering a large surface with a thin layer.
• For wax removal rules, refer to the cartridge method: points 5-9.
Common mistakes when depilating with warm waxes:
• incorrect wax application (against hair growth) and incorrect strip removal (in the direction of hair growth);
• tearing off the strip perpendicular to the skin — this leads to hematoma formation;
• repeated application of wax to the same spot leads to damage to the upper epidermal layer.